Configuring a Radio Profile 265
service profile later. (To configure a radio profile, see “Configuring a Radio
Profile” on page 265.)
To map a service profile to a radio
1 In the Create Service Profile wizard, click Radio Profile Selection. The
Radio Profile Selection page appears.
2 Select the radio profile in the Available Radio Profiles list.
3 Click Add to move the profile name to the Current Radio Profiles column.
4 Click Finish to save the changes and close the wizard.
Configuring a Radio
Profile
A radio profile is a set of attributes that you can apply to multiple radios.
A default radio profile named default is provided and cannot be deleted.
Rather than configuring each radio individually, you can create a new
radio profile and apply it to multiple radios that you select. You can also
create a radio profile as part of a domain policy and apply it to MAP
access points on different WX switches.
To Next Page
Loading...
