3Com 3CRWX120695A - To Import a Configuration

Importing and Exporting WX switch Configuration Files 397
If you import a configuration containing information that an older version
of 3WXM or MSS does not support, the information is ignored when the
configuration is imported.
If you import a WX switch configuration, you must enable 3WXM
management of the WX switch before you can deploy the WX switch to
the network. (To enable 3WXM management of a WX switch, see
“Configuring Basic WX Properties” on page 186.)
To import a
configuration
To import a configuration, use the following procedure.
1 In the main 3WXM window, select File > Import. The Import
Configurations dialog box appears.
2 In the Import Into Mobility Domain group box, select one of the following
options:
■ Click Use File Info to import the configuration information using the
Mobility Domain specified in the configuration files.
■ Click Select to specify a Mobility Domain to import configuration
information to. Then select the Mobility Domain from the list.
3 To replace existing WX switch information in 3WXM with information
from the configuration file, select Overwrite Existing WX Switches.