186 CHAPTER 5: CONFIGURING WX SYSTEM AND ADMINISTRATIVE PARAMETERS
Configuring Basic
WX Properties
To configure basic WX properties, do the following steps.
1 Access the WX Switch wizard for the switch. (See “Accessing the Modify
Switch Wizard” on page 185.)
2 Select System and Administrative at the top of the wizard, if not already
selected.
3 Select WX Properties from the organizer list on the left side of the page, if
not already selected.
4 In the WX Name box, type the name of the WX switch (1 to 256
alphanumeric characters, with no spaces or tabs).
Within a network plan (and all Mobility Domains), each WX must have a
unique name.
5 In the WX Model list, select the WX switch model.
To Next Page
Loading...
