Generating a Client Summary Report 487
Generating a Client
Summary Report
The client summary report lists current client sessions.
The data for this report comes from the monitoring service. The Enable
client session collection option, located in the Client Monitor group
box of the Monitoring Settings tab, must be enabled. (See “Changing
Monitoring Settings” on page 552.)
1 Select Reports > Client Summary from the toolbar in the main 3WXM
window.
The Client Summary Report dialog box appears.
Table 58 WX Configuration Report Sections
Section Description
System Info Name, system IP address, software, states of the
management services, and states of active RF scanning
and countermeasures.
Mobility Domain System IP address of the seed for the Mobility Domain the
WX switch is in.
10/100 Ports 10/100 Ethernet port settings configured on the WX
switch.
Gig Ports Gigabit port settings (if applicable configured on the WX
switch.
VLANs VLANs configured on the WX switch.
Spanning Tree STP settings configured on the WX switch.
IP Properties IP settings, including routes and DNS parameters,
configured on the WX switch.
ACLs Access Control Lists (ACLs) configured on the WX switch.
APs Directly connected MAPs configured on the WX switch.
Distributed APs Distributed MAPs configured on the WX switch.
Radio Profiles Radio profiles configured on the WX switch.
Service Profiles Service profiles configured on the WX switch.
802.1X 802.1X parameters configured on the WX switch.
RADIUS RADIUS server groups and servers configured on the WX
switch.
Access Rules AAA rules configured on the WX switch.
Mobility Profile Mobility profiles configured on the WX switch.
Location Policy Location policies configured on the WX switch.
Local User DB Users configured in the local database.
To Next Page
Loading...
