488 CHAPTER 12: GENERATING REPORTS
2 Select the scope type of the report from the Report Scope Type listbox:
■ Mobility Domain
■ Wireless Switch
■ Site
■ Building
■ Floor
■ Coverage Area
3 Select the instance for which you want the report. For example, if the
scope is Building, select the building.
4 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
5 To prevent 3WXM from replacing an existing report of the same type with
this new report, click next to Overwrite Existing Files to deselect this
option.
6 Click Generate.
7 When the report is generated, click the report link to view it.
The client summary report contains the following sections:
■ Total Num Sessions
■ Average SNR
■ Average RSSI
■ Session Summary
■ Client Sessions
■ SSID Summary
■ Access Type Summary
■ Top Bandwidth Sessions
■ Low RSSI Sessions
■ Low SNR Sessions
(See “Using the Client Monitor Window” on page 420 for information
about the data columns in each section of the report.)
To Next Page
Loading...
