C
3WXM VERIFICATION RULES
This appendix lists the verification rules used by 3WXM. Rules are listed
alphabetically by rule class.
(For information about how to interpret and respond to errors or
warnings that occur when a configuration or a device in the network
conflicts with a rule, see “Verifying Configuration Information” on
page 373.)
Table 59 10/100 Ethernet Port Rules
Title Description Classification
Configured MAP bias
check
Verifies that the bias setting for a MAP’s
connection with a WX switch matches in
the network plan and in the network.
Error
Configured vs actual
MAP check
Verifies that a MAP in the network is also
in the network plan.
Error
Dual-homed check Verifies that a MAP is either dual-homed in
both the network plan and the network, or
is not dual-homed in both the network
plan and the network.
Error
Missing MAP check Verifies that a MAP in the network plan is
also in the network.
Error
MAP port enabled
check
Verifies that a port connected to a MAP is
enabled.
Warning
MAP type check Verifies that the MAP model in the
network plan matches the model in the
network.
Error
WX IP address/port
check
Verifies that the port number or IP
interface of the MAP’s connection with its
WX switch match in the network plan and
in the network.
Error
PoE enabled check Verifies that PoE is enabled on a port
connected to a MAP.
Warning
To Next Page
Loading...
