420 CHAPTER 10: MONITORING THE NETWORK
You can change the RSSI options even after measurement data is
displayed. The data is immediately updated. To take a new measurement,
click on the new measurement point. The measurement data is
immediately updated for the new measurement point.
Using the Status
Summary Window
The Status Summary window shows the operational status of 3Com
equipment (WX switches, their MAP access points, and MAP radios). The
Status column shows the equipment status, using the same colors as the
Explore window. Additional information is displayed for each equipment
type.
Double-click on a row in the Status Summary window to display more
information about the object.
Using the Client
Monitor Window
The Client Monitor window shows detailed information about client
activity on the network.
Client information is displayed in the following tabs:
■ Client Activity — displays association and 802.1X information for
the clients
■ Client Sessions — lists bandwidth, signal-to-noise-ratio (SNR), and
received signal strength indicator (RSSI) information for client sessions
■ Client Watch List — lists the clients 3WXM is tracking. You can set
up a watch list of clients you want 3WXM to track. 3WXM collects
session and roaming information for the clients.
To Next Page
Loading...
