3Com 3CRWX120695A - To Modify MAP Attributes

278 CHAPTER 6: CONFIGURING WIRELESS PARAMETERS
To m od if y M AP
attributes
To modify MAP attributes, use the following procedure.
1 On the MAP page of the Wireless page of the WX Switch wizard, select a
MAP port, then click Modify MAP. The Modify MAP wizard appears.
2 Select the MAP model from the MAP Model list:
■ AP2750 — Single-radio model.
■ MP-352 — Dual-radio model.
■ MP-341 — Single-radio model.
■ MP-262 — Dual-radio model.
■ MP-252 — Dual-radio model.
■ MP-241 — Single-radio model.
■ MP-52 — Dual-radio model.
■ MP-122 — Dual-radio model.
■ MP-101 — Single-radio model.