3Com 3CRWX120695A - Managing Network Plans

80 CHAPTER 3: GETTING STARTED
selections for 802.11a and 802.11b/g radios later in the planning process
or allow WX switches to set the channels automatically.
5 Do one of the following:
■ If you intend to use the physical planning features, click Next to
configure Site information. Go to “Planning the 3Com Mobility
System” on page 93.
■ If you intend to configure and manage WX switches without using the
physical planning features, go to “Configuring WX System and
Administrative Parameters” on page 177.
■ Click Finish to save the changes and close the wizard.
3WXM saves your work only when you click Finish, not when you click
Next.
Managing Network
Plans
After creating a network plan, you can save, close, open, or delete it. You
can also share a network plan with others.
Saving a Network Plan
When you save a network plan, a directory with the same name as the
network plan is created in the xml\db directory of the 3WXM installation
directory. You should regularly back up the xml directory so that you have
additional copies of your network plans.