68 CHAPTER 2: WORKING WITH THE 3WXM USER INTERFACE
successfully create the object, you must change its unique attributes (for
example, WX name). If the object is a parent of other objects, all the child
objects are also created or replaced (depending on the paste action).
After an object is copied into the buffer, the object can be pasted or
replaced as many times as required.
Copy and Paste To create a new object with the copy and paste options:
1 Select the object you want to copy in the Organizer panel.
2 Right-click on the object and select Copy, or select Edit > Copy from the
main toolbar.
3 Select the parent object where you want the copy to go.
4 Right-click on the parent object and select Paste, or select Edit > Paste
from the main toolbar.
The new copy of the object appears under the parent object.
For example, to create a new WX switch in a Mobility Domain:
1 Expand the view of a Mobility Domain in the Organizer panel to display
the WX switches in the Mobility Domain.
2 Select the switch you want to copy, then right-click on the switch and
select Copy.
3 Select the Mobility Domain where you want the copy to appear, then
right-click and select Paste.
Copy and Paste
Replace
To replace an object with the copy and paste replace options:
1 Select the object you want to copy in the Organizer panel.
2 Right-click on the object and select Copy, or select Edit > Copy from the
main toolbar.
3 Select the object you want to replace.
4 Right-click on the parent object and select Paste Replace, or select Edit
> Paste Replace from the main toolbar.
The configuration wizard for the new copy appears.
5 Make configuration changes to the new object if required, then click
Finish to close the wizard and save the changes. (Generally, you will need
to make some configuration changes in order to make the object unique.
Otherwise, 3WXM cannot complete the paste operation.)
To Next Page
Loading...
