338 CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS
Configuring
Accounting
To configure accounting settings, follow these steps.
1 Click Accounting at the top of the wizard to display the following page.
(The page contents are the same for 802.1X, MAC, last-resort, and Web
AAA.)
2 To enable this accounting rule for the SSID, select Enabled. By default, a
rule you configure in 3WXM is disabled, which means 3WXM does not
add the rule to a WX switch’s configuration.
3 Select one of the following record options:
■ Select Start-Stop to specify that records are sent at the start of a
session and the end of a session.
■ Select Stop-Only to specify that records are sent only at the end of a
session.
4 To select the accounting method, click Choose Available, then select the
method from the list:
■ RADIUS server group — A server group that you have configured
previously.
■ LOCAL — The WX switch’s local database.
To Next Page
Loading...
