Configuring and Managing Access Rules for Network Users 337
If you select PEAP, the EAP Sub-Protocol is MS-CHAPV2. For other
protocols, the EAP Sub-Protocol is None.
8 To select the authentication method, click Choose Available, then select
the method from the list:
■ RADIUS server group — A server group that you have configured
previously.
■ LOCAL — The WX switch’s local database.
You can add one or both methods to the list.
■ If you specify a RADIUS server group as the first method and a user is
denied access by the RADIUS server, no authentication and
authorization are attempted with the other methods specified in the
list.
■ If you specify LOCAL as the first method and a user is not in the local
user database on the WX, authentication and authorization are
attempted with a RADIUS server group if one is defined in the method
list.
The method you select for authentication is also used for authorization.
To add a server group, click Create and go to “To define a RADIUS server
group” on page 298. After you create the server group, click Choose
Available and then select the server group from the list.
9 Do one of the following:
■ To configure accounting, go to “To configure accounting settings,
follow these steps.”.
■ To save changes and close the wizard, click Finish.
To Next Page
Loading...
