44 CHAPTER 2: WORKING WITH THE 3WXM USER INTERFACE
■ Third Party APs — Third-party access points that 3WXM needs to be
aware of while planning or monitoring the network.
The Mobility Domains section is expanded by default.
To display the objects in a section of the Organizer panel, click on the
right arrow next to the section name. For example, to display the
objects in the Sites section, click next to Sites. The section is
expanded to display the site names.
To expand the view of an object in the Mobility Domains or Sites panel
and display its contents, click on the plus sign next to the object. For
example, to display the buildings in a site, click on the plus sign next to
the site name. To display the floors in the building, click next to the
building name, and so on.
Details Checkbox In the Mobility Domains and Sites sections, the Details checkbox controls
the level of detail displayed. When Details is enabled, all objects in the
Mobility Domain or site can be displayed. When Details is disabled, the
display is restricted to objects for which you can display data in the
Monitor tab of the Content panel.
■ Mobility Domains — The display is restricted to switches and their
port connections, including connections to MAP access points. Neither
Domain Policies nor Rogue Detection objects are displayed. The only
objects listed under the WX switches are for physical port connections
and Distributed MAP connections.
To Next Page
Loading...
