478 CHAPTER 11: DETECTING AND COMBATTING ROGUE DEVICES
Location Tab
The location tab displays the likely physical location of the rogue. (See
“Displaying a Rogue’s Geographical Location”.)
Displaying a
Rogue’s
Geographical
Location
If building and floor information for the site is modeled in the network
plan, you can display the likely physical location of a rogue. 3WXM
displays the floor plan for the floor where the rogue is believed to be
located, and displays the areas where the rogue is probably located.
This option displays the likely location of the rogue when the data was
collected by the monitoring service from the Mobility Domain’s seed WX
switch. If the rogue has moved since then, the location information will
not be current.
To display the location of a rogue within a site
1 Select the rogue in the rogue list.
2 Click on the toolbar. The Location tab appears, next to the details
tab.
The likely location of the rogue is indicated by color. The legend beneath
the floor view indicates the likelihood represented by each color.
Table 55 Rogue Listener Details Columns
Column Description
MAP MAP whose radio detected the rogue or noted its absence.
This column has data only if the radio that detected the
rogue or its disappearance is modeled in a floor plan.
Floor Floor on which the rogue was detected or disappeared, if
the network plan contains floor information.
Note — This column has data only if the radio that
detected the rogue or its disappearance is modeled in a
floor plan.
Channel Channel on which the rogue was detected or disappeared.
RSSI Strength of the signal received by the listener from the
rogue.
SSID SSID of the rogue.
To Next Page
Loading...
