3Com 3CRWX120695A - Change Management Options

384 CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS
You also can display the Managed Devices tab by selecting View >
Managed Devices from the main 3WXM toolbar.
The Managed Devices tab enables you to review changes and synchronize
the WX switches in the network with their counterparts in 3WXM by
either copying the changes to the other WX switch, or removing the
changes from the WX switch that was changed.
A row of information is displayed for each WX switch. The Local Status
and Network Status columns indicate where changes have occurred.
If you make a configuration change on a WX switch in the network, then
reverse that change, 3WXM still alerts you that changes have occurred.
Change Management
Options
The Managed Devices tab has the following change management
options:
■ For local changes (changes in the network plan):
■ Review — Display the configuration changes that have occurred
in 3WXM for the selected WX switch. Changes are displayed in CLI
command form.
■ Deploy — Send the configuration changes to the same WX switch
in the network.
■ Undo — Remove the changes from the WX switch in the network
plan.