Using the Rogue Detection Tab 473
device, add the device to known addresses list. (See “Ignoring Friendly
Third-Party Devices”.)
Using the Rogue
Detection Tab
To display rogue information, select View > Rogue Detection from the
toolbar in the main 3WXM window. The Rogue Detection tab appears in
the Content panel.
The Rogue Detection tab lists information about the rogue devices
detected in the network. The rogue list section of the tab lists all rogues
detected within the time period specified in the filter section. To display
information about a rogue, select the rogue. Detailed information
appears in the rogue details section of the tab.
To Next Page
Loading...
