Rebooting WX Switches or MAP Access Points 403
6 To apply configuration changes to another domain policy, repeat step 3
through step 5.
7 Click Close to close the Policy Manager dialog box.
If you later make configuration changes to a domain policy, you can apply
the changes to one or more WX switches, as described in “Applying
Domain Policy Changes to WX Switches” on page 400.
Rebooting WX
Switches or MAP
Access Points
You can use 3WXM to reboot WX switches and MAP access points.
1 Select Changes > Reboot WX/MAP Devices from the toolbar in the
main 3WXM window. The Reboot WX/MAPs dialog box appears.
2 In the Mobility Domain Selection list, select the Mobility Domain the WX
or MAP you want to reboot is in.
To Next Page
Loading...
