Managing Certificates 407
2 Do one of the following:
■ Click Accept to allow the connection to the WX switch.
If you did not select either of the options in step 1, when you click
Accept, a secure connection with these certificate credentials is
allowed for this session until you close the network plan.
■ Click Reject to reject the connection to the WX switch.
Managing
Certificates
After you have installed certificates, you can review a certificate or delete
a certificate that is stored in the 3WXM certificate store.
Reviewing Certificate
Details
After installing a certificate in 3WXM, you can see information such as
the time frame for which the certificate is valid and who issued the
certificate.
To review certificate details
1 Select Tools > Certificate Management from the toolbar in the main
3WXM window.
2 Select a certificate from the list, and click Details. (You can also
double-click the certificate to see its details.)
The Certificate Details dialog box appears, listing the certificate
information.
3 Click Close.
4 In the Certificate Management dialog box, click Close.
Deleting Certificates
To delete certificates, follow these steps.
1 Select Tools > Certificate Management.
2 Select a certificate from the list.
3 Click Delete.
4 When prompted, click Yes to confirm the certificate deletion, or click No
to cancel the deletion.
If you clicked Yes, the certificate is deleted.
5 In the Certificate Management dialog box, click Close.
To Next Page
Loading...
