452 CHAPTER 10: MONITORING THE NETWORK
Refreshing RF Trend
Data
By default, the data displayed in the RF Trends window is not refreshed.
You can refresh the data on demand, or automatically at regular intervals.
If you enable automatic data refresh, the data is refreshed based on the
RF trending polling interval specified in the monitoring service. (See
“Changing Monitoring Settings” on page 552.)
To refresh the data on demand
To refresh the data on demand, click the Refresh option on the RF Trends
window’s toolbar.
To refresh the data automatically
1 Click the checkbox next to Auto Refresh on the RF Trends window’s
toolbar to enable the option.
2 Click Refresh.
Accessing Realtime
Performance
Statistics
In addition to information supplied by the monitoring service, you can
access performance statistics directly from the network.
1 Do one of the following:
■ Select Monitor > Performance from the toolbar in the main 3WXM
window. The Performance Monitoring dialog box appears. Go to
step 4.
■ Select an object in the Organizer panel, then right-click and select
Performance Statistics. The Performance Monitoring dialog box
appears, with the scope and statistic type selected. Go to step 5.
■ In the Client Monitor window, click on the window’s toolbar. Go
to “Viewing Performance Data” on page 455.
To Next Page
Loading...
