Enabling 3WXM Client To Access the Monitoring Service 541
The options you select in this dialog box apply to all HTTPS connections
with the 3WXM client. For example, the 3WXM client also checks the
validity of certificates presented by WX switches, and the settings you
select in this dialog affect those connections too.
Completing the
connection
To complete the connection, use the following procedure.
1 Select one or both of the following options:
■ Always accept self-signed certificates. — Use this option to
configure the 3WXM client to always accept a self-signed certificate
from the 3WXM monitoring service and from WX switches.
■ Install this certificate to validate future connections. — Use this
option to accept the certificate and consider the certificate to be valid
for future connections.
When you use this option, the Certificate Check dialog box is not shown
again for the certificate, even if the certificate becomes out of date.
2 Click Accept.
To Next Page
Loading...
