EasyManua.ls Logo

3Com 3CRWX120695A - Uploading a WX Switch Configuration into 3 WXM

3Com 3CRWX120695A
570 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
370 CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS
Uploading a WX
Switch
Configuration into
3WXM
If you have already installed and configured a WX, you can upload its
configuration into 3WXM. You must first set the country code using the
set system countrycode command in the CLI. For more information
about this and other CLI commands, see the Wireless LAN Switch and
Controller Command Reference.
After you upload a WX configuration, the WX becomes a member of the
Mobility Domain specified in the configuration. If this Mobility Domain is
Distribute changes
with policy manager
Copies all WX switch configuration parameter settings
from the domain polices to a WX switch. You also can
update the domain policies by copying parameters from a
WX switch.
(See “Working with Domain Policies” on page 400.)
Deploy Sends WX switch configurations from the network plan
into the live network, to implement the network plan on
the live WX switches.
(See “Deploying WX switches from a Network Plan to the
Network” on page 390.)
Verify configuration
changes
Checks WX switch configuration changes against a set of
configuration rules, alerts you to configuration items that
do not fit the rules, and enables you to either edit these
configuration items or ignore the rules.
(See “Verifying Configuration Information” on page 373.)
Synchronize local and
network changes
Compares WX switch configurations in the network with
their counterparts in the network plan, and enables you to
review the differences, and either deploy the new changes
to synchronize the configurations, or undo the changes.
(See “Synchronizing Local and Network Changes” on
page 383.)
Save image in
repository
Adds a WX system image to a repository. When you
distribute images and configuration files, you can select an
image from the repository.
(See “Distributing Image and Configuration Files” on
page 393.)
Distribute Images &
Configuration
Applies software images to WX switches and optionally
reboots the WX switches to place the new images into
effect.
(See “Distributing Image and Configuration Files” on
page 393.)
Table 25 WX File Management Options in 3WXM (continued)
Option Description

Table of Contents

Other manuals for 3Com 3CRWX120695A

Related product manuals