476 CHAPTER 11: DETECTING AND COMBATTING ROGUE DEVICES
2 Select the period by which you want to filter the list from the Filter By
listbox:
■ Current — Lists the rogues detected during the most-recent polling
interval. Go to step 4.
■ Current Hour — Lists the rogues detected during the most-recent
hour. Go to step 4.
■ Current Day — Lists the rogues detected during the most-recent day.
Go to step 4.
■ History — Lists the rogues detected during a specific date range. Go
to step 3.
3 To change the start and end dates for the History interval, edit the values
in the boxes or click on the down arrows next to From and To to display
calendars and select the dates.
4 Click Apply. 3WXM replaces the rogue list with the set of rogues
detected during the period you selected.
To change the scope of the rogue list
1 Select the scope in the Organizer panel.
2 Select Show for selected scope in the toolbar of the Rogue Detection
tab.
3WXM updates the rogue list to display only the rogues detected within
the selected scope.
If you change the scope by selecting another object in the Organizer
panel, or you deselect the Show for selected scope option, click
Refresh to refresh the rogue list for the new scope setting.
Displaying Rogue
Details
To display details for a rogue, select the rogue in the rogue list. Details are
displayed in the tabs in the right portion of the Rogue Detection tab.
Activity Log Tab
The Activity Log tab lists the appearance and disappearance of the
selected rogue, the rogue’s SSID, and the number of MAP radios that
detected the rogue or its disappearance.
Table 54 lists the information displayed in the Rogue Details section of the
Rogue Detection tab.
To Next Page
Loading...
