Synchronizing Local and Network Changes 383
b Click next to the instances you want to disable, then go to step 10.
10 Click Close.
Synchronizing Local
and Network
Changes
Whenever configuration changes occur to a WX switch, 3WXM alerts you
that changes have occurred. If configuration changes occur on a WX
switch in the network, 3WXM displays a popup dialog with the following
message:
Network changes have been detected. Please use the "Local &
Network Changes" option to handle the changes.
WX switch configuration changes also are indicated in the Alerts panel.
■ Local Changes Available indicates that configuration changes have
occurred in the network plan.
■ Network Changes Available indicates that configuration changes have
occurred in the live network.
Click on either of these to display the Managed Devices tab. The
Managed Devices tab appears in the Content panel.
To Next Page
Loading...
