3Com 3CRWX120695A - Generating a Watch List Client Report

Generating a Watch List Client Report 491
6 To prevent 3WXM from replacing an existing report of the same type with
this new report, click next to Overwrite Existing Files to deselect this
option.
7 Click Generate.
8 When the report is generated, click the report link to view it.
The client errors report contains the following sections:
■ Cumulative errors for the scope of the report
■ Client errors on individual WX switches
(See “Using the Client Monitor Window” on page 420 for information
about the data columns in each section of the report.)
Generating a Watch
List Client Report
The watch list client report lists session information and roaming history
for clients on the watch list.
The data for this report comes from the monitoring service. The Collect
client connection & roaming traps option, located in the Client
Monitor group box of the Monitoring Settings tab, must be enabled. (See
“Changing Monitoring Settings” on page 552.) In addition, the client
must be on the client watch list. (See “Managing the Client Watch List”
on page 440.)
1 Select Reports > Watch List Client from the toolbar in the main 3WXM
window.
The Watch List Client Report dialog box appears.
2 Select the time period for the report:
■ 1 Hour
■ 24 Hours
■ 7 Days
■ 30 Days
3 Click Add to add a report filter. The filter configuration fields are
activated.
4 Click on the Select field, and select MAC Address. (3WXM monitors the
clients on the watch list by MAC address.)
5 Click on the Value field. Erase the text in the field and type the MAC
address of a client.