208 CHAPTER 5: CONFIGURING WX SYSTEM AND ADMINISTRATIVE PARAMETERS
3 Select System IP Address from the organizer list on the left side of the
page, if not already selected.
4 Select the VLAN on which the system IP address is configured from the
System VLAN/IP list box.
5 Optionally, enter the IP address of the switch’s default gateway router in
the first row of the Gateway IP Address section. You can enter up to four
gateway addresses.
You also can configure gateway router addresses using the IP Routes
option of the System and Administrative page. (See “Configuring Static
Routes” on page 238.)
6 Click another item in the organizer list, select another page in the wizard,
or click Finish to save the changes and close the wizard.
To Next Page
Loading...
