Configuring IP Services 251
2 In the Aging Time box, specify the amount of time a dynamic entry can
remain unused before the entry is removed from the ARP table.
The value range for the aging timeout is 0 to 1,000,000 seconds. The
default value is 1200 seconds. To disable aging, specify 0 as the aging
timeout.
The local entry for the WX, static entries, and permanent entries in the
ARP table are not affected by the aging timeout.
3 To add an ARP entry, click New ARP Entry. The Create ARP Entry dialog
box is displayed.
To Next Page
Loading...
