Configuring a Service Profile 259
■ Last Resort — Automatically authenticates the client and allows
access to the SSID requested by the client, without requiring a
username and password from the client.
■ Web Auth — Serves the client a web page from the WX switch’s
nonvolatile storage for login to the SSID. This is the default.
■ None — Denies authentication and prohibits the client from accessing
the SSID.
The fallthru authentication method applies only if the WX switch does
not have an 802.1X or MAC authentication rule that matches the SSID
name and the client’s username or MAC address.
10 If the fallthru authentication method is Web AAA, specify the file location
in the WX switch’s nonvolatile memory of a customized web page to
serve the client for login, in the WebAAA page box.
11 Include the subdirectory name. For example, if you created a subdirectory
called mycorp in the user files area of the WX switch’s nonvolatile
storage, and copied files for login page mycorp-login.htm into this
subdirectory, type the following in the WebAAA page box:
mycorp/mycorp-login.htm
By default, the WebAAA page box is blank, in which case the WX switch
serves its default Web login page, the 3Com Webaaa login page, to Web
AAA clients.
12 Do one of the following:
■ To configure encryption, go to “Configuring Encryption”.
■ To save changes and close the wizard, click Finish.
To Next Page
Loading...
