346 CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS
5 In the Profile Name box, type the name of the Mobility Profile.
The name can be up to 16 alphanumeric characters, and it cannot
contain tabs.
6 In the Ports list, specify ports to include in the Mobility Profile:
■ All — Include all MAP or wired authentication ports. Go to step 11.
■ Selected — Include a selected list of ports. Go to the next step.
■ None — Include no ports. Go to step 11.
7 Click Choose Available and select a port. Repeat for each port.
8 In the Distributed MAPs list, specify the Distributed MAPs to include in the
Mobility Profile:
■ All — Include all Distributed MAPs. Go to step 11.
■ Selected — Include a selected list of Distributed MAPs. Go to the next
step.
■ None — Include no Distributed MAPs. Go to step 11.
9 Click Choose Available and select a Distributed MAP. Repeat for each
Distributed MAP.
To Next Page
Loading...
