Working with Domain Policies 401
sure that all domain policy changes are applied to existing WX switches
before you create a new WX.
3Com recommends that you verify the network plan before applying
domain policy changes to WX switches.
To apply domain policy changes to WX switches:
1 In the main 3WXM window, select Changes > Policy Manager. The
Policy Manager dialog box appears.
2 Make sure that the arrow at the top of the dialog box is pointing from
Policy to Wireless Switch. If not, click the arrow to reverse its direction.
3 In the Select Mobility Domain list, select the Mobility Domain that
contains the WX switches that you want to apply the domain policy
changes to.
A list of all WX switches in the Mobility Domain appears.
4 Select a WX.
The changes that apply to this WX appear. By default, all changes are
applied. Do one of the following to clear changes:
To Next Page
Loading...
