Organizer Panel 49
Table 8 lists the WX switch objects. These objects control configuration
parameters for an individual WX switch.
AAA Settings for Authentication, Authorization, and
Accounting (AAA) parameters:
■ RADIUS servers
■ Local user database (configured on the WX switch
instead of on the RADIUS server)
■ Access rules for administrative access to WX switches
■ Access rules for user access to the network
■ Location policies to locally override VLAN or security
ACLs assigned to a user by a RADIUS server.
802.1X Settings for 802.1X.
ACLs Access Control Lists (ACLs) to filter traffic.
Mobility Profiles Filters to control user access to specific MAP access points.
IP Services Settings for IP parameters:
■ IP routes to the default gateway
■ Domain Name Service (DNS) settings
■ Network Time Protocol (NTP) settings
■ Address Resolution Protocol (ARP) settings
Table 8 WX Switch Objects
Object Description
Management Services Same as Management Services in Domain Polices, but
applicable to this WX switch only.
Radio Profiles Same as Management Services in Domain Polices, but
applicable to this WX switch only.
Ports / MAPs Settings for individual ports and for directly connected
MAP access points. You can configure these parameters
on an individual switch only. The Domain Policies do not
contain a Ports / MAP object.
Distributed MAPs Settings for MAP access points that are indirectly
connected to the switch, through the network. You can
configure these parameters on an individual switch only.
The Domain Policies do not contain a Ports / MAP object.
Load Sharing Same as Management Services in Domain Polices, but
applicable to this WX switch only.
VLANs Same as Management Services in Domain Polices, but with
the IP interface of the VLAN on this switch included.
Table 7 Domain Policies Objects (continued)
To Next Page
Loading...
