3Com 3CRWX120695A - Page 513

Changing Options for RF Planning 513
3 To change the saturation value, select the S option and do one of the
following:
■ In the S box, specify a value between 0 and 100 percent.
■ Use the slider to specify the saturation value.
4 To change the brightness value, select the B option and do one of the
following:
■ In the B box, specify a value between 0 and 100 percent.
■ Use the slider to specify the brightness value.
5 Click OK to accept the color. The RF Planning Options tab in the
Preferences dialog box is active.
6 Do one of the following:
■ Change another color.
■ Click another Preferences tab.
■ Click Close to close the Preferences dialog box.
Defining a Color by Changing RGB Properties
You can define a color by changing red, blue, and green (RGB) color
properties.
1 To specify a color by changing RGB, click RGB in the Choose Color dialog
box.