521
MAP boundary check Verifies that a MAP’s wiring closet is the
same as the wiring closet of the coverage
area that uses that MAP.
Error
MAP coverage area
check
Verifies that all coverage areas that share a
MAP have the MAP in the same wiring
closet.
Error
WX support of
Distributed MAP check
Verifies that the MSS version on the WX
switch managing the MAP can support
Distributed MAP connections.
Error
WX support of MAP
check
Verifies that the MAP model is supported
by the MSS version on the WX switch that
manages the MAP.
Error
Serial number check Verifies that the serial number is specified
for a Distributed MAP.
Error
Table 68 Dual Homed MAP Rules
Title Description Classification
MAP configuration
check
Verifies that the WX connections for a
MAP are valid:
■ The MAP must have at least one WX
connection.
■ The MAP can have up to two direct
connections, or one direct connection
and up to three distributed
connections, or up to four distributed
connections with no direct connections.
Error
Table 69 Fan Status Table Rules
Title Description Classification
Fan status check Verifies that a fan on a WX switch is
operating normally.
Warning
Table 67 Distributed MAP Rules (continued)
Title Description Classification
To Next Page
Loading...
