526 APPENDIX C: 3WXM VERIFICATION RULES
Table 78 MAP Radio Rules
Title Description Classification
Beacon SSID check Verifies that an MP-101 or MP-122 is not
configured in the network plan to advertise
(beacon) more than one SSID.
Error
Maximum allowed Tx
power check
Verifies that the radio has a transmit power
setting that is within the range controlled
by the country code.
Error
Radio profile check Verifies that the radio profile for the
coverage area matches the associated
radios.
Warning
Radio range check Verifies that a MAP radio’s channel is valid
for both the country of operation and the
radio power level.
Warning
Regulatory domain
check
Verifies that the radio technology is
supported by the country code specified.
Error
Table 79 Mobility Domain Rules
Title Description Classification
Coverage area WX
check
Verifies that a coverage area within a
Mobility Domain uses a WX in that
Mobility Domain.
Error
Duplicate IP address
check
Verifies that VLANs have unique IP
addresses within a Mobility Domain.
Error
Missing WX system IP
check
Verifies that the system IP address is set on
each Mobility Domain member.
Error
Missing seed WX
check
Verifies that the Mobility Domain is not
missing a seed WX switch.
Warning
Missing seed WX for
RF sweeps check
If RF sweeps are configured, verifies that
there is a seed WX switch to deploy the
sweeps.
Warning
MSS version check Verifies that the software versions of all
WX switches belonging to a Mobility
Domain are the same.
Warning
VLAN same IP subnet
check
If a VLAN has an IP address specified for
each unique VLAN name in a Mobility
Domain, verifies that the IP address is in
the same network as all other IP addresses
specified for the same VLANs on all other
WX switches.
Warning
To Next Page
Loading...
