546 APPENDIX D: CHANGING MONITORING SERVICE PREFERENCES
The monitoring service does not monitor any WX switches by default.
Also, if you change network plans later and want to monitor the WX
switches in the new plan, you must add the WX switches to the list of
monitored WX switches. The monitoring service does not automatically
monitor the WX switches.
CAUTION: If the IP address or other information about a monitored WX
switch changes, do not delete and readd the switch using the Add From
Plan option. If you do, the data that has already been accumulated for
the switch is lost. Instead, select the switch and click Modify to change
the IP address or other information.
1 Select Tools > 3WXM Services Setup. The 3WXM Services Setup dialog
box appears. (See Figure 17 on page 536.)
2 Click the Monitored WXs tab.
To Next Page
Loading...
