102 | PGC5000 GEN 2 | 892 J006 MNAH
Figure 5-14: MODBUS Configurator Example
Configuration information requires the following name(s):
⎯ Master Controller
⎯ Oven Name(s)
⎯ Schedules
⎯ Streams
⎯ Component
Note that ovens with Integrated Controller will show a Master Controller to represent the functions of
the Integrated SBC, even though no physical PGC5000A Master Controller is present.
2. Save the csv file on the Configurator system’s local drive or flash unit.
3. The csv file contains all of the information for the Control system (see Figure 5-15).
To Next Page
Loading...
