892 J006 MNAH | PGC5000 G EN 2 | 141
⎯ Component at 30 seconds. If multiple components are coming in from the instrument, then
space the components in 1 second intervals, making sure all of them are of a type calculated.
The scripting is to be run at 1 second past the end of analysis time.
10.4 Scripting example to read I/O
Script names will be READ, analog number, then digital number where applied. For example:
READA2D4.
Example of script:
A2 = READ_ANALOG("INIO.WAGO1.ANIAN.2")
PUT_CONC("CompXAT008",A2)
D4 = READ_DIGITAL("INIO.WAGO1.DIGIN.4")
IF D4 = 1 THEN
SET_BASIC_ALARM(1)
Endif
END
11 Glossary of abbreviations
ACL Access Control List
ANSI American National Standards Institute
AOC Absence of Condition
ARV Atmospheric Reference Vent
CAN Controller Area Network
DSP Digital Signal Processing
DTC Digital Temperature Controller
DVM Digital Valve Module
EPC Electronic Pressure Controller
ESD Electrostatic Discharge
FID Flame Ionization Detector
FPD Flame Photometric Detector
ISA International Standards Association
LSV Liquid Sample Valve
LUI Local User Interface (operational software interface located on the Master Controller)
MC Master Controller
NIC Network Interface Controller or Card
OPC Open Productivity and Conductivity
PCB Printed Circuit Board
PIC Programmable Integrated Circuit
RT Retention Time
RUI Remote User Interface (a PC running remote user interface software)
SBC Single Board Computer
SHS Sample Handling System
TCD Thermal Conductivity Detector
TCF Time Coded Function
TOD Time of Day
To Next Page
Loading...
