Rerunning Results
AEROSET
®
Customer Training Guide 5-23
94858-103 — July 2003
7. To initiate the run, select <RUN> in the Action Area. The RUN
OPTIONS screen displays.
8. Select the options desired, then select <Start> in the upper
right-hand corner of the RUN OPTIONS screen.
Rerunning All Assays
When this option for rerunning all assays on a sample is selected, all
assays will rerun with the same measurement type (Standard, Dil 1, Dil
2) as originally selected.
1. Select <Database> in the Information Access Area, if the screen is
not currently displayed.
2. Select the sample(s) to be rerun.
• To highlight multiple consecutive samples in a list, select the
first sample in the list then highlight the remaining samples by
holding [Shift] and pressing [↓] on the keyboard.
• To highlight multiple random samples, hold down [Ctrl] while
selecting the samples on the screen.
3. Select <Rerun> in the right-hand column. The Rerun dialog
window is displayed.
Figure 5.13: Rerun Dialog Window
4. Select <All Results>. A confirmation dialog window is displayed.
Figure 5.14: Rerun Confirmation Dialog Window
To Next Page
Loading...