System Configuration
AEROSET
®
Customer Training Guide 8-17
94858-103 — July 2003
Audible Alert Options
The audible alert options on the SYSTEM CONFIGURATION screen
allow the Operator to define audible alerts when the following occurs:
• An Error Message is generated
• All samples have been aspirated from the Carousel Sampler
• All samples have been aspirated from the FastTrack™ Sampler
• A STAT sample has been aspirated
• The System goes into the SUSPEND status
• The System goes into the READY status
To configure audible alarms on the SYSTEM CONFIGURATION
screen:
•Select <RUN> in the Action Area to display the RUN OPTIONS
screen.
• Then, select <SysCfg> to display the SYSTEM
CONFIGURATION screen.
For information about configuration of the audible alert options, refer to
Audible Alerts in Section 2, Installation Procedures and Special
Requirements of the AEROSET System Operations Manual.
• Audible Alert-will come
with default alarms for
each.
• To test sound, touch
button to the left.
• There is a volume control
on the back of the CPU.
(yellow button)
To Next Page
Loading...