Need help?Do you have a question about the ADPRO FastTrace and is the answer not in the manual?
Steps to set up the PC with VideoCentral Lite for FastTrace operation.
Steps to configure the FastTrace unit before powering on.
Procedure for establishing the initial connection between PC and FastTrace.
Procedures for testing the installation to confirm correct operation.
An overview of main tasks and sequence for programming a FastTrace unit.
Modifying factory configured settings for site names, network addresses, etc.
How to access the programming screen via VideoCentral.
Configuring unique Site ID, Observer, and CMS passwords.
Configuring Ethernet and serial communication port settings.
Displays video channels and allows assigning camera names and configuring settings.
Details on alarm input parameters, types, and wiring.
Defining how the system operates overall, including data storage.
Programming up to four different operational modes with unique characteristics.
Defining recording rules, event triggers, and responses for each camera and mode.
Do's and don'ts for ensuring a good and trouble-free FastTrace installation and testing.
Technical specifications for the FastTrace system, including video, audio, and connectivity.
General| Model | FastTrace |
|---|---|
| Video Compression | H.264 |
| Input Channels | 4/8/16 |
| Network Connectivity | Ethernet |
| Operating System | Embedded Linux |
| Recording Resolution | Up to 1080p |
| Alarm Inputs | 4/8/16 |
| Alarm Outputs | 2/4/8 |
| Power Supply | 12V DC |
| Frame Rate | 30fps |
To Next Page