ADPRO FastTrace by Xtralis Installation and User Manual
Doc 11168_12 121
No video from camera User
Video restored on camera User
Contrast alarm on camera User
Normal contrast on camera User
ATM transaction User
ATM transaction started User
ATM transaction finished User
Started mode User
Finished mode User
Control output active User
Control output inactive User
Alert generated Maintainer This log is not new, but any alerts that do not produce
one of the alert-specific messages will result in this log
getting generated. There should be no such alerts, so we
should never see this log entry.
Alert sent to user Maintainer
Alert acknowledged Maintainer
Alert discarded Maintainer
Entry delay started User
Entry delay finished User
Exit delay started User
Exit delay finished User
No video alert generated Maintainer A No-Video alert was generated.
Vmd alert generated Maintainer A VMD alert was generated.
Contrast alert generated Maintainer A contrast alert was generated.
Alarm input alert generated Maintainer An alarm input alert was generated.
Alarm input tamper alert generated Maintainer An alarm input tamper alert was generated.
Digital input alert generated Maintainer A digital input alert was generated.
POS ATM alert generated Maintainer A POS/ATM alert was generated
Log Title Visibility Comments
To Next Page
Loading...