Agilent Technologies 6850 Series - Replacement parts; SplitSplitless inlet

Inlets and valves
6850
6850
Released: April 2004 6850 Series Gas Chromatograph Service Procedures 26
Replacement parts
Split/Splitless inlet
Description Part no. Qty.
1. O-rings (10/pk)
5180-4181 1
2. Nut, Merlin Microseal
5182-3445 –
3. Septum, Merlin Microseal
5182-3444 –
4. Screw, M3 × 16 mm, Torx T-10
1390-1022 1
5. Plastic fitting (10/pk)
5181-3394 1
6. Split vent trap assembly
Replacement filter cartridge kit
(2/pk)
G1544-80550
G1544-80530
1
–
7. Split vent flow line
(14.2 in. long × 0.125 in. id)
G1544-20620 1
8. Swagelok nut, 1/8 in. brass (10/pk)
5180-4103 1
9. Swagelok back ferrule, 1/8-in.
brass (10/pk)
5180-4115 1
10. Swagelok front ferrule, 1/8-in.
brass (10/pk)
5180-4109 1
11 . S e p t u m n u t
18740-60835 1
12. Septum, 11 mm, solid, (25/pk)*
5181-1263 1
13. Top insert assembly
Top insert assembly, for 6850 valve
box (not shown)
G1544-60585
G2630-61080
1
–
14. 1/4-inch Viton O-ring,*
(order no. 5180-4182, 12/pk)
5180-4182 1
15. Inlet liner, split mode, standard*
5183-4647 1
*Also see the Agilent chemical analysis consumables and
accessories catalog.
Description Part no. Qty.