Detectors
6850
6850
Released: April 2004 6850 Series Gas Chromatograph Service Procedures 147
Flame photometric detector
Description Part no. Qty
1. Exit tube assembly–A1 19256-20700 1
1A. Exit tube assembly–SST
19256-20705 1
2. Nut, brass, 1/4-inch 0100-0056 1
3. Ferrule, Vespel, 1/4-inch id (order
no. 5080-8774)
0100-1061 1
4. Weldment, block 19256-80560 1
5. O-ring (Kalrez) ignitor 0905-1102 1
6. Spacer, ignitor
19256-20590 1
7. Glow plug
0854-0141 1
8. Ignitor cable assembly G1535-60600 –
9. Gasket, heat shield
19256-80040 1
10. Window, first heat shield
19256-80030 1
11. Disk, heat shield 19256-20580 1
12. Coupling, stainless steel
19256-20550 1
13. Lockwasher (4 required)
2190-0108 4
14. Screw, M3 × 12 (4 required) 0515-0911 4
15. Clamp
19256-00090 1
16. O-ring, silicone, 0.926-inch id
(orange)
0905-0955 1
17. Window, second heat shield
19256-80060 1
18. O-ring, silicone, 1.05-inch id
(orange)
0905-1104 1
19. Flange adapter
19256-20510 1
20. Flange ring
19256-00200 1
21. Screw, M3 × 25 (4 required) 0515-0065 4
22. O-ring, Viton, 1.239-inch id
(brown)
0905-1100 1
To Next Page
Loading...
Need help?
General
