Agilent Technologies 6850 Series - Valve driver assembly

Inlets and valves
6850
6850
Released: April 2004 6850 Series Gas Chromatograph Service Procedures 50
Valve driver assembly
Description Part no. Qty
1. Valve driver bracket G1580-00070 1
2. Captured screw, M4 × 12 mm,
To r x T- 2 0
1390-1023 2
3. Valve driver wiring harness
G1530-60660 1
4. Pneumatic tubing, 1/8-inch OD,
Te f l o n
0890-0746 8
5. Adapter fitting, 10/32 × 1/16-inch
hose barb
0100-1205 8
6. Standoff (included with valves) — 8
7. 4-way Solenoid valves G1580-61090 4
8. O-ring (with valves and end plate
kit)
— 10
9. Solenoid valve end plate kit 05890-61097 1
10. Screw, skt hd cap 0515-1214 2
11. Elbow fitting, 1/4-inch, male 0100-1632 2
12. Exhaust tubing, 1/4-inch od, 120
inch
0890-1489 1
13. Heater cable assembly (not shown)
G1530-60790 1