Agilent Technologies 6850 Series - Microcell electron capture detector

Detectors
6850
6850
Released: April 2004 6850 Series Gas Chromatograph Service Procedures 145
Microcell electron capture
detector
Description Part no. Qty
1. Micro ECD top cover G2397-00011 1
2. ECD signal wire assembly 19233-60635 1
3. Anode/Ferrule/Nut assembly
(specific license required)
G2397-60540 1
4. ECD thermal cover
G1533-00030 1
5. Thermal cover clip 19233-00095 1
6. EDC top insulation
G1533-00020 1
7. Screw, M4 × 10 mm, Torx T20
0515-2495 3
8. Clamp, interconnect 19231-00040 1
9. Captive screw, detector pallet, M4
× 20 mm, T20, Torx
1390-1024 4
10. FID pallet
G1531-40020 1
11. Screw, M4 × 45 mm, Torx T20
0515-2484 2
12. Microcell Electron Capture
Detector assembly:
1
– General licensed ECD, new G2397-65500 –
– General licensed ECD, rebuilt G2397-69900 –
13. ECD block insulation
G1533-00010 1
14. ECD seal insulation G1533-00080 1
15. Screw, M4 × 12 mm, Torx T20 0515-2496 1
16. ECD makeup gas adapter
weldment assembly:
G2397-80520 1
– Gigabore liner G2397-20540 –
– End cap 19233-20755 –
17. Ferrules, capillary columns: 1
– No hole (plug), graphitized-vespel 5181-7458 –
– Graphite, 0.5-mm id (10/pkg) 5080-8853 –
– Graphite, 1.0-mm id (10/pkg) 5080-8773 –
18. Capillary column nut (2/pkg)
5181-8830 1
19. Screw, M4 × 12 mm, Torx T20,
chrome plate
0515-2711 2
20. ECD interconnect assembly G1533-60510 1
21. Micro ECD signal PCB assembly
G2397-60010 1
22. Micro ECD interface PCB
assembly
G2397-60020 1