Agilent Technologies 6850 Series - Raising the lid to the service position

Covers
6850
6850
Released: April 2004 6850 Series Gas Chromatograph Service Procedures 17
Raising the lid to the service
position
WARNING
Do not work on the instrument unless the
stop plate is raised, preventing the lid from
accidentally falling closed while you are
working.
When closing the lid, have someone else hold
the lid for you.
Never disconnect the safety wire. If the
safety wire is disconnected, the GC can
become unbalanced.
Caution
Check behind the lid to make sure the area is
clear of obstructions before opening the lid
to the service position.