Return Loss Measurement Return Loss Measurement
168 Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition
–[Meas], the power currently measured by the Return loss
Module’s internal power sensor in dBm
Figure 105 The Calibration Parameters Screens - Return Loss Diode
2 Press [Next]. The Calibration parameters screen for the Monitor
Diode appears, as displayed in Figure 106. This screen shows
current value for the following quantities:
–[Para], the parasitic power value measured by the Return Loss
module’s monitor diode in dBm. This value is determined by the
termination calibration, or you can use the default setting held in
the factory calibration.
–[Ref], the power measured by the Return Loss module’s monitor
diode during the reflectance calibration in dBm
To Next Page
Loading...
Need help?
General
