Applications Working with Application Graphs
224 Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition
Figure 142 shows a graph where markers A and B are not locked to
samples. If you press the cursor key, the marker will move along the
curve.
NOTE You can only lock/unlock markers to samples if you have already
locked markers to the curve, see “How to Lock Markers to the Curve”
on page 222.
To lock/unlock markers to samples:
1 Press the [Menu] softkey.
2 Move to one of the following menu items:
– <Lock to Samples On>, to lock markers to samples or
– <Lock to Samples Off>, to lock markers to the curve.
NOTE Only one of these menu items will be available for selection.
3 Press Enter to return to the graph.
Figure 142 Lock to Samples Off
To Next Page
Loading...
Need help?
General
