5 Displaying
184 InfiniiVision Oscilloscopes User’s Guide
To assign a predefined label to a channel
1 Press the [Label] key.
2 Press the Channel softkey, then turn the Entry knob or successively press the Channel
softkey to select a channel for label assignment.
The figure above shows the list of channels and their default labels. The channel does
not have to be turned on to have a label assigned to it.
3 Press the Library softkey, then turn the Entry knob or successively press the Library
softkey to select a predefined label from the library.
4 Press the Apply New Label softkey to assign the label to your selected channel.
5 Repeat the above procedure for each predefined label you want to assign to a channel.
To define a new label
1 Press the [Label] key.
2 Press the Channel softkey, then turn the Entry knob or successively press the softkey
to select a channel for label assignment.
To Next Page
Loading...
