Displaying 5
InfiniiVision Oscilloscopes User’s Guide 185
The channel does not have to be turned on to have a label assigned to it. If the channel
is turned on, its current label will be highlighted.
3 Press the Spell softkey, then turn the Entry knob to select the first character in the
new label.
Turning the Entry knob selects a character to enter into the highlighted position shown
in the “New label =” line above the softkeys and in the Spell softkey. Labels can
be up to ten characters in length.
4 Press the Enter softkey to enter the selected character and to go to the next character
position.
You may position the highlight on any character in the label name by successively
pressing the Enter softkey.
5 To delete a character from the label, press the Enter softkey until the letter you want to
delete is highlighted, then press the Delete Character softkey.
6 When you are done entering characters for the label, press the Apply New Label
softkey to assign the label to the selected channel.
When you define a new label, it is added to the nonvolatile label list.
Label Assignment Auto-Increment
When you assign a label ending in a digit, such as ADDR0 or DATA0, the oscilloscope
automatically increments the digit and displays the modified label in the “New label” field
after you press the Apply New Label softkey. Therefore, you only need to select a new
channel and press the Apply New Label softkey again to assign the label to the channel.
Only the original label is saved in the label list. This feature makes it easier to assign
successive labels to numbered control lines and data bus lines.
To load a list of labels from a text file you create
It may be convenient to create a list of labels using a text editor, then load the label list
into the oscilloscope. This lets you type on a keyboard rather than edit the label list using
the oscilloscope’s controls.
You can create a list of up to 75 labels and load it into the oscilloscope. Labels are added
to the beginning of the list. If more than 75 labels are loaded, only the first 75 are stored.
To Next Page
Loading...
Need help?
General
