Installer manual AlphaVision ML Rev. 3.60 01-01-2015 59
Press the <#/OK> button to store the keyfob name. Use the <*> key to erase a letter.
Wireless options
In the "WIRELESS OPTIONS" menu you can determine whether enrolling wireless detectors is done using an
alarm and/or a tamper signal or solely the tamper signal. Default this option is set to solely tamper. In
existing systems it may be helpful to enroll new or existing components by means of the tamper signal. In
this way other wireless components cannot influence the enrolling procedure.
To Next Page
Loading...